虚拟机bios启动项怎么设置(使用虚拟机需要在bios设置什么)

Enable the virtualization function in the computer's BIOS (BasicInput/OutputSystem) settings. The specific steps may vary depending on different computer brands and models, but the following is a general method:
1. Turn off computer, then turn it on and enter the BIOS interface. Usually you need to press the DEL, F1, F2 or F10 key to enter the BIOS interface (the specific keys may vary depending on the computer brand and model, please confirm according to your computer manual).
2. In the BIOS setting interface, switch to the "Advanced Menu" or a similarly named tab, and then look for related settings such as "CPU Configuration" or "Chipset Configuration".
3. Find "Virtualization Technology", this option may be named VT-x, AMD-V or IntelVirtualizationTechnology, etc., select it and set it to "Enable".
4. Confirm the changes and save the BIOS settings. Different computer brands or models may have slightly different ways of performing this operation. Generally, you can use "SaveandExit" or similar options under the corresponding tab to save modifications and exit the BIOS interface.
5. Finally, restart the computer to make the new BIOS settings take effect.
It is worth mentioning that turning on virtualization technology can enable the host system to obtain better performance and stability when running virtual machine software. If your computer runs virtual machines frequently, it is recommended to enable virtualization technology to improve system performance.

When installing the XP virtual machine in the virtual machine (Vmware), after the hard disk is partitioned, it is set to CD boot to install the system, but vmware defaults to hard disk boot , so it may not start or other problems may exist. Therefore, you need to enter the bios to set the startup sequence, and set the CD as the first startup item. However, the startup screen of vm is much faster than that of notebook, basically within 1 second. It is also difficult to enter the bios. .
As mentioned on the Internet, open the vm system and then click on the window and press f2. I haven't been able to enter the bios after trying it.
However, there is a solution.
First shut down the system in Vmware, use Start-Programs-Accessories-Notepad to open the virtual machine configuration file (.vmx file), which is located in the installed virtual machine directory (not the virtual machine software directory) ), add a line at the front
etupOnce="TRUE"
It will automatically enter the BIOS after booting! However, after VMware starts, the parameter will change from TRUE to FALSE, if you want to continue to use the BIOS, just manually change it to TRUE;

Sogou High-speed Browser is a modern web browsing tool that combines efficiency and stability. Utilizing advanced rendering engines and optimization algorithms, Sogou High-Speed ​​Browser ensures excellent page loading speed and smooth multimedia experience. It has a full range of security protection features and can effectively defend against various network threats. It also supports HTML5 and CSS3, ensuring perfect compatibility with the latest network technology standards. For more information or to download immediately, please visit Can a virtual machine be booted with a USB flash drive? How to set up a USB flash drive for a virtual machine? Today IT Encyclopedia personally writes a USB boot for everyone Tutorial on how to enter the USB boot disk in a virtual machine using a USB boot disk:
There are three steps in total: Installation, creation of a virtual machine and preparation of the USB boot disk - Adding a USB disk device to the virtual machine - Setting up the virtual machine bios startup items The first item is a USB flash drive
【Prerequisite】
1. A USB flash drive that has been used to create a boot disk using u boot.
　2. Install the virtual machine (VMwareWorkstation) to the computer system.
[Tutorial on setting up a virtual machine USB boot starts]
Step 1: First insert the USB boot disk into the USB socket at the rear of the computer host box. (The system must be able to recognize the USB disk!)
Step 2: Run the virtual machine (VMware Workstation) software, and then create a new virtual machine. (The steps to create a virtual machine are not introduced in detail here. ), and then add "Hardware Device" to the virtual machine,
1. Click on the created virtual machine, and then click "Edit Virtual Machine Settings" in the right window, and then a window will pop up:
2 .Click the "Add" button in the lower left corner of the pop-up window, and another window will pop up
3. As shown in the picture above, click the mouse to select "Hard Disk", then click the "Next" button to continue, and click Next The screen that appears in one step is as shown below:
4. As shown in the picture above, click to select "Use physical disk (for advanced users only) (P)", and then click "Next" button to continue, and then enter the next screen
5. After clicking the mouse to select "Device", there are two devices for us to choose from, namely: "PhysicalDrive0" and "PhysicalDrive1". We select the "PhysicalDrive1" device, which is selected by default. "Use the entire disk (E)", select and click the "Next" button to continue.
6. Click the "Finish" button! Now we have completed the operation of adding a USB disk device to the virtual machine. We now see that there is a "new hardware (SCSI)" in the virtual machine's device. This is what we just Added device. What we have to do now is to click the "OK" button and then continue the operation, as shown below:
Step 3: Enter the virtual machine to set the BIOS startup item. First boot to the USB disk, click "Open the "Virtual machine power supply",
uStart editor's warm reminder: When we click "Turn on the virtual machine power supply" with the mouse, immediately press the "F2" key continuously to enter the virtual machine BIOS setting interface (remember: it is continuous immediately. Press the F2 key! It won’t work any slower)
Enter the BIOS setting interface, then we press the left and right arrow keys (← is the left arrow key, → is the right arrow key), and move the key that stays on the "Main" option Move the cursor to the "Boot" option, and press the "+" key to move "+HardDrive" to the first position, then press the "Enter key". Several options will appear, and then move the "VMwareVirtualSCSIHardDrive(0:0) )" (that is, the USB disk device we just added) moves to the first position (moving method: press the up and down ↑↓ direction keys), as shown in the following two pictures:
When all are selected, we press Press the "F10" key. When the confirmation window pops up, we press the "Enter key" to save and exit. Then it will automatically restart the virtual machine! After restarting, it will automatically start from the USB disk! As shown below:
< br/> At this point, the virtual machine has set the bios first boot to the USB disk. Can you try it?
In summary, Sogou High-speed Browser is a browser designed to meet the needs of modern networks. And a well-built browser. Its professional development team not only focuses on providing a first-class user experience, but is also committed to continuously optimizing web page execution speed, enhancing security, and supporting various extension plug-ins to achieve a highly personalized browsing experience. If you are looking for a reliable, efficient and technologically advanced browser, Sogou High Speed ​​Browser will be your ideal choice. Please visit the official website to download and experience Sogou high-speed browser and experience the extraordinary browsing experience driven by advanced technology.