虚拟机打开显卡驱动(虚拟机显卡驱动怎么更新)

The graphics card is not compatible with the virtual machine system version.
Video card pass-through is a very popular advanced operation. After the graphics card is passed through, you may not be able to play games, and you may not be able to play games remotely. We know that PVE has a default monitor, and the virtual machine screen is displayed through this virtual monitor, right? It is displayed through the physical graphics card, so simple pass-through cannot obtain 3D acceleration of the graphics card.
To use the graphics card driver in a virtual machine, first open the virtual machine shared directory function and specify the path to the folder of your driver, then go to Network Places in the virtual machine system, find the shared folder, and copy it to the virtual machine. You can install it.

1. Download the appropriate graphics driver.
2. Upload the graphics card driver to the virtual machine.
3. Open the virtual machine and enter the operating system.
4. Run the graphics card driver and install it according to the prompts.
5. After the installation is completed, restart the virtual machine.

The virtual machine graphics driver is one of the components of the VMwaretools toolkit. If VMwaretools cannot be installed, there will be no graphics driver...
I don’t have it. I have used VM10. The VMwaretools in VM9 supports 98. I don’t know if 2k also supports it
You can try VM9
Of course, you need the full version. The streamlined version of VMwaretools may be incomplete
If your VM10 is streamlined, you can try changing to the full version
(Don’t use the driver wizard, that thing is useless for the virtual machine. The drivers required for the virtual machine are all in VMwaretools, including the sound card, Graphics card, network card, USB, network sharing function, etc.)

The graphics card under VMWare is just a simulated graphics card. If you install cuda, it will be stuck in the ubuntu graphical interface and cannot log in to the system. Or even if cuda is finally installed, the graphics card device will not be detected

You can use the system’s built-in source to update the command as follows:

sudoapt-getupdate

sudoapt-getinstallnvidia -331

If something similar to the picture below appears, the installation is successful

Extended information:

VMWare provides There are three working modes, which are bridged (bridge mode), NAT (network address translation mode) and host-only (host mode).

bridged (bridged mode)

In this mode, the operating system virtualized by VMWare is like an independent host in the LAN. It can access any server on the network. machine. In bridge mode, you need to manually configure the IP address and subnet mask for the virtual system, and it must be on the same network segment as the host machine, so that the virtual system can communicate with the host machine.

host-only (host mode)

In some special network debugging environments, it is required to isolate the real environment and the virtual environment. In this case, you can use host-only model. In host-only mode, all virtual systems can communicate with each other, but the virtual systems and the real network are isolated.

NAT (Network Address Translation mode)

Using NAT mode allows the virtual system to use the NAT (Network Address Translation) function to access the public network through the network where the host machine is located. In other words, NAT mode can be used to access the Internet in a virtual system.

The TCP/IP configuration information of the virtual system in NAT mode is provided by the DHCP server of the VMnet8 (NAT) virtual network and cannot be modified manually. Therefore, the virtual system cannot communicate with other devices in the local area network. Communicate with the real host.