mac安装vmware虚拟机(mac vmware虚拟机安装windows)

The specific steps to install a virtual machine on macbookair are as follows:

1. First open the VMware virtual machine software, click the yellow part on the left to create a virtual machine machine.

2. Then select the virtual machine storage path in the pop-up window.

3. Then select the system type to be installed in the pop-up window.

4. Then set the system login password and system serial number in the pop-up window.

5. Select the system installation type.

6. Select the settings recommended by the system by default.

7. Load system files.

8. The system installation begins.

To use xcode and sketch, it must be run in a mac environment. Unfortunately, if I install Black Apple on my laptop, the independent graphics card and wireless network card driver will not be able to solve it. I don’t want to Toss it around, try it with a virtual machine first. At first, the Yosemite system running under the virtual machine was laggy. Every movement and lag made me almost give up. However, after a few days of adjustment, I can basically use the virtual machine normally and smoothly. The experience is slightly worse than that of Apple, with occasional lags. , but it can also be used flexibly, and the plan to buy a MacBook can be postponed. Now I will share my experience in installing and optimizing the mac virtual machine.
First follow the tutorial below, download the resources provided by the author, follow the steps step by step and it will be basically smooth, and 10.10 will be installed.
My computer configuration is as follows. There is no solid-state drive. If it is installed on an SSD, the performance of the virtual machine can be improved a lot:
I have allocated 6G of memory to the virtual machine, and two processors with four GB each. A core, a 40G hard disk, the virtual graphics card turns on 3D acceleration, and then the configuration displayed under Mac is like this:
It is not enough, especially the virtual graphics card is flawed, so it must be optimized before it can be used. Optimized The principle is to simplify what you can, and turn off special effects if you can, without duplication. Here are some optimization settings:
1. Remove the Dashboard from the Dock
Every time you accidentally click on this, the computer will inevitably freeze. , the frosted glass effect of the virtual graphics card is too much to bear. Move it to the trash can decisively, and there are many ways to open applications.
2. Disable all kinds of flashy transparent windows and animation effects
OSX Yosemite uses a large number of transparent menus, windows and title bars, which requires processor performance and memory rendering. Visit System Preferences, go to "Accessibility" and check "Reduce Transparency".
Change the animation of the minimized window from "Magic Effect" to "Zoom Effect" to experience faster running speed when the window is minimized.
Enter System Preferences, enter the "Dock" function update, and select "Zoom Effect".
3. Disable useless components and extensions in the notification center
The various practical widgets in the notification center are indeed cool, but they will lose a lot of performance. For older Macs, opening too many components in the Notification Center will slow down the restart and login process.
Access System Preferences, enter the "Extensions" function, and uncheck unused components.
4. Install beamoffAPP
To improve the performance of macosx10.10yosemite in vmwareworkstation, it can be set to run automatically at boot
After the above four steps, the Mac under the virtual machine has also reached basic performance To the point of using it, it’s stress-free to type the code and look at the web page. The above method can also be used on old Mac computers. If there are any other optimization methods and suggestions, you are welcome to leave a comment.

Today I will introduce to you the specific steps on how to use the VMwareFusion virtual machine on a Mac computer to install a Win7 virtual machine.
1. First we need to install vmware and vmwaretools on the computer (must be installed). If you are installing for the second time, you must uninstall it cleanly, otherwise a file not found error will pop up when the installation starts.
2. Then download vmwarefusion for Mac. You can go to the webpage to search for download, or you can choose to download from the official website
3. After downloading, double-click to install Vmware (you can only double-click to install, unlike other dmg files to drag and drop to the folder)
4. Then during the installation process, no operation is required, just click Next. The serial number of Fusion8 is as follows:
FY75A-06W1M-H85PZ-0XP7T-MZ8E8

ZY7TK-A3D4N-08EUZ-TQN5E-XG2TF

FG1MA-25Y1J-H857P- 6MZZE-YZAZ6
5. After installing vmwarefusion, click Finish.
6. Next, install win7
1. First, you need to prepare the iso image file of win7. You can also download it from the official website
2. Then open the installed VMware and choose to create a custom Set the virtual machine options
7. Then in the pop-up window, click MicrosoftWindows-=-window764-bit (the default is 32-bit if there is none)
8. Continue Come down and click on New Virtual Disk
9. Then click the Done button on the lower right
10. Then, select the location you want to save, you can directly select the default, and that’s it The window below will pop up
11. Click the wrench icon above, in the pop-up window, find the CD option, click
12. In the pop-up window, select a CD, find the downloaded image
13. In the window, check Connect CD and close the window
14. As shown in the figure, after returning , the page displays the play button, click the button (if this page is not displayed, it means that the system has not been found, it will be displayed after clicking the shutdown of the virtual machine in the upper left)
15. Finally, install win7 process, follow the prompts to perform relevant operations, and finally complete the installation.

This macbook virtual machine installation tutorial is divided into two steps: first, we need to download a macbook virtual machine software; second, we To create a virtual system, everyone can do this according to their own preferences. Next, we will give you a detailed demonstration operation.

First, we need to install the virtual machine software on the macbook. The editor chose VMwareFusion. After successfully downloading the compressed package file of the software on the official website, we will get the following interface:

Figure 1: Installing VMwareFusion on macbook

Drag VMware
Fusion into the application, and then the installation will appear progress bar. After the progress bar runs out, press F4 to open the console. We find the VMware
Fusion icon and open it. Then, the macbook system will ask you whether you are sure to open the application because it was downloaded from the Internet? After selecting OK, you will be asked to enter the MacBook password, and then we will see the interface in Figure 2:

Figure 2: MacBook system extension has been blocked

At this time, we need to open the security preferences and click the red box [Allow] within.

Figure 3: The macbook system allows VMwareFusion to be loaded

After successfully opening the VMwareFusion software, you will get the following interface:

Figure 4: VMwareFusion installation interface

If you have successfully obtained VMware

Just enter the Fusion license key directly; if you don’t have it yet, click Purchase below and proceed to the next step. After entering the license key, you will be prompted to enter the MacBook system password again. After that, we will see the following interface. Click [Finish], and the MacBook virtual machine software will be installed successfully.

Figure 5: VMwareFusion installation completion interface

Next, we need to create a custom virtual machine on this macbook virtual machine software. After opening the software, you will get the following interface, click [Create Custom Virtual Machine].

Figure 6: VMwareFusion creates a custom virtual machine interface

Then, select the operating system, which you can choose according to your own needs. The editor here chooses Windows7/64-bit.

Figure 7: VMwareFusion operating system selection interface

Select [New Virtual Disk], as shown in the figure below.

Figure 8: VMwareFusion selects the new virtual disk interface

After clicking Continue, the MacBook virtual machine configuration is complete. In [Customized Settings], we can also make related virtual machine configuration settings according to our own needs.

Figure 9: VMwareFusion completes the virtual machine configuration interface

How about it? Is this macbook virtual machine installation tutorial easy to understand at a glance? But I have a faster way! We can choose to install the CrossOver software, which can still achieve the purpose of using Windows applications, and it does not require the creation of a virtual machine configuration.

CrossOver is a very professional virtual machine-like software that allows us to successfully run Windows software on Mac and Linux without having to purchase a Windows license or restart the system. Through CrossOver, we can launch Windows applications directly from the dock, which is very efficient and convenient. CrossOver also comes with its own application list, which involves a wide variety of programs, as shown in the figure below.

Figure 10: CrossOver installation application interface

At the same time, CrossOver also has the characteristics of seamless and fast integration and high-speed operation, which can enable us to get rid of the cumbersomeness of dual systems and achieve cross-platform file interoperability.