Enter the bios main interface to set up and enable.
The specific steps are as follows:
1. Enable your VT function and use special tools to check whether the computer supports VT.
2. Then turn on the computer and hold down the F1 key to enter the bios settings main interface.
3. Click the right arrow → on the keyboard, select [advanced] from the main menu, and double-click [cupsetup].
4. Jump to the following interface by pressing the downward arrow on the keyboard.
5. Press the "+" key on the numeric keypad.
6. Press F10 and select yes to boot and restart.
7. After restarting, you can see that the computer can now support VT.
Situation 1:
1. After entering the BIOS page, find the "BIOSFeatures" - "IntelVirtualTechnology" and "VT-d" options, and modify both "Disabled" is "Enabled";
2. Press the save key F10 to save and exit (Save&Exit), and VT will be opened successfully! What should you do if you have completed the above operations and the emulator still shows that VT is not enabled?
Scenario 2:
1. After entering the BIOS page, find "M.I.T" - "Advanced Frequency Settings" or "Advanced Frequency Settings" - "CPU Overclocking Advanced Advanced Settings" or "AdvancedCPUCoreSettings" - "SVM" option, change "Disabled" to "Enabled";
2. Press the save key F10 to save and exit (Save&Exit), VT It was successfully opened! What should you do if you have completed the above operations and the emulator still shows that VT is not enabled?
Situation 3:
1. After entering the BIOS page, find "M.I.T" - "Advanced Frequency Settings" or "Advanced Frequency Settings" - "CPU Overclocking Advanced Advanced Settings" or "AdvancedCPUCoreSettings" - "SVM" option, change "Disabled" to "Enabled";
2. Press the save key F10 to save and exit (Save&Exit), VT It was successfully opened! What should you do if you have completed the above operations and the emulator still shows that VT is not enabled?
Situation 4:
1. After entering the BIOS page, select "Chipset" Find "IntelVirtualizationTechnology(VT-x)", change "Disabled" to "Enabled", or change "Disable" to "Enable",
2. Press the save key F10 to save and exit (Save&Exit) , VT is successfully turned on! What should you do if you have completed the above operations and the simulator still shows that VT is not turned on?
Special emphasis on: Part Users may not be able to find the option after following the tutorial, then they can go to different top menu bars according to the keywords "Intel(R)VirtualizationTechnology" "Virtual", "Virtualization", "VT-X", "SVM", "Virtualization Technology" , to find the VT settings.
上一篇:联想如何开启vt虚拟化
下一篇:联想电脑开启虚拟化