内存条应该插在哪个位置(内存条插在哪)

The correct insertion of the front and back of the computer memory module is as follows:

The correct insertion method and direction of the desktop computer memory module: open the fixed locks on both sides of the slot so that the memory can slide Enter (pay attention to the fool-proof interface). Insert the memory slot vertically and use a little force on both sides (do not use force). When you hear two crisp clicking sounds, it means it has been inserted correctly. You can see that the lock bites the mouth of the memory. Sometimes you may only hear a click sound. It is not that the memory cannot be inserted, but that the buckle does not make a sound with the memory bayonet or is too tight. Just use a little force to push the buckle in first.

Before adding a memory module to a laptop, you need to remove the battery. Turn on the right battery lock switch on the back, push the left battery lock to the left (keep it still), and then remove the battery.

After removing the battery, use a screwdriver to unscrew the screws on the back of the laptop (the T-shaped area is sufficient). Open the back cover of the computer. In the upper left corner of the T-shaped area is the place to add the memory module. Insert the memory stick: First determine the front and back sides. There is a small opening (notch) on the memory stick. Just line up this little opening with the bump on the memory module socket. After the small opening is aligned with the protrusion, the memory module can be inserted.

At this time, the memory module is tilted up, and then press the fixed switches on both sides to fasten it naturally; if you want to remove the memory module, push the fixed switch outward to easily remove the memory module. . Cover the back case of the laptop, tighten the screws and install the battery.

The memory module is an essential part of the computer. The CPU can address the memory through the data bus. Historically, computer motherboards had main memory, and the memory modules were extensions of the main memory. There will be no main memory on the motherboard of future computers, and the CPU will completely rely on the memory stick. All contents on external storage must pass through memory to be effective.

a. Press the buckle of the memory slot, refer to the following picture

b. Place the memory Align the notch with the protrusion of the slot, and push the memory into the slot vertically and downward

c. When the buckle automatically locks, the memory can be installed

The above is a step-by-step tutorial on how to insert a computer memory stick. I hope it can help everyone.
🔓Open the fixed locks
Open the fixed locks on both sides of the slot so that the memory can slide in (pay attention to the fool-proof interface).
🔍Insert the memory slot vertically
Insert the memory slot vertically, using a little force on both sides (do not use brute force). When you hear two crisp click sounds, it means you have inserted it correctly. At the same time, you can also see that the lock bites the mouth of the memory.
👉What should I do if the buckle does not make a sound?
But sometimes no matter how hard you apply, you may only hear a click. It is not that the memory cannot be inserted, but that the buckle does not make a sound with the memory port. Or maybe it's just too tight. Just use a little force to push the buckle in first.