Installation steps:
1. Download and install vmware virtual machine software.
2. Create a virtual machine.
Select a new virtual machine
Select Custom (Advanced)
< p> I will install the operating system later and create a virtual blank hard diskSelect Microsoft Windows as the guest operating system
[page_break]
The default name and location for saving the virtual machine configuration file is sufficient
Create a new virtual disk
Single file storage virtual disk
Select a partition with larger remaining capacity to save the virtual machine hardware file
[page_break]
3. Load the windows7 installation image into the virtual machine CD-ROM drive in vmware.
4. Turn on the virtual machine and set the startup device to the optical drive.
Boot screen
Press ESC on the boot screen to select CD-ROMDrive
In the future, when the mouse is operated in the virtual machine, if you want to exit the virtual machine, press Ctrl+Alt
[page_break]
5. Start installing Windows 7.
Load the windows7 installation environment
Click to install now
Accept the license terms
Select upgrade installation
Create a new space
[page_break]
Select the size and apply
Create the disk partition and then proceed to the next step
Now Install Windows
Restart directly from the hard disk
Complete the installation
[page_break]
The installer is preparing the computer for first use
Select an account username
< p>Okay, everything is done and ready to use~VMware virtual machine can simulate running multiple different operating systems on one computer, including reading U disk and connecting to the network. , there are many users who want to use a USB boot disk to install the win7 system on VMware, but don’t know where to start. For this reason, the editor will bring you the method of installing the win7 system on a VMware virtual machine using a USB disk as follows.
1. Preparation tools
1. Install VMware virtual machine 12
2. U disk of 4G or above,
3. ghostwin7 system :
2. Steps to install ghostwin7 system with VMware12 using U disk
1. Run the VMwareWorkstation12 virtual machine and click "Create a new virtual machine";
2. Open the new virtual machine Computer wizard, select "Typical (recommended)", next step;
3. Select "Install operating system later", next step;
4. Select Microsoft Windows for the client system, Select Windows 7 for the version, and select Windows 7x64 if it is 64-bit;
5. Name the virtual machine, select the save location, next step, keep other default settings, and finally click Finish;
6 , close the virtual machine, insert the USB boot disk, then open the virtual machine, select the newly created virtual machine windows7, click "Edit Virtual Machine Settings", click "Add";
7. Select the hardware type " "Hard disk", keep the "Recommended" option for the disk type, and select "Use physical hard disk";
8. Click the "Device" drop-down box and select PhysicalDrive1. Next, if there is no PhysicalDrive1, restart the virtual machine;
9. After the settings are completed, right-click Windows 7 and select "Power" - "Turn on the power and enter the firmware";
10. Enter the BIOS and press the → key to go to Boot. Select HardDrive, use shift and + to move it to the first position, expand HardDrive, move HardDrive (0:1) to the first position, press F10 to save and restart;
11. After restarting, insert the PE installation USB flash drive, you can check the specific operation steps, and just follow the steps to complete the installation.
The above is how to install the win7 system on a VMware virtual machine using a USB flash drive. Users in need can follow the steps above.
上一篇:虚拟机vmware安装win7