One day a friend asked me how to configure the Windows2008 environment in VMwareWorkstation. I have time to share it today. Win2008r2 will be the trend of servers in the future. You can study it in advance. Down.
Then I am ready to write this article
How to configure the Windows 2008 environment in VM
1. Double-click--Create a new virtual machine
2.
1. Customization (Advanced)
2. Double-click--Next
p>
3. Keep the compatibility as default
Double-click - Next
4
1. Install later Operating system
2. Double-click - Next
5
Because Windows2008 is a windows product, choose Windows
2. Select Windows 2008 for the version
3. Double-click - Next
6
The name and location of the virtual machine are both Feel free
Double-click - Next
7
The processor configuration is defined according to your physical machine configuration and then double-click - -Next
8
Memory settings are defined according to your physical machine configuration and then double-click - Next
p>
9
Network type
If it is a router user, choose bridging
If it is an ADSL single user, choose NAT
Then Double-click--Next
10
I/O Controller Keep the default Double-click--Next
11
Disk type according to your personal preference
Double-click - Next
12
Choose to create a new virtual machine disk
Double-click - Next
13
Set the disk size according to your personal preference
Double-click--Next step
14
Keep the disk file as default Double-click--Next step
15
If you have set all the above and feel that there is no problem, just double-click - Finish
16
The following Windows2008 configuration is completed
It only takes 5 steps to solve the problem of installing software.
1. First, open the vmware software, find the virtual machine, and click "Open this virtual machine" to start the virtual machine.
2. After opening the virtual machine, click the "Virtual Machine" button in the window to open the menu.
3. A menu will pop up after clicking on the source code. In the pop-up menu, select "Install VMware Tools".
4. After the installation is completed, select the software to be installed on your computer and press the "CTRL+c" key on the keyboard to hit it.
5. At this point, return to the virtual machine and press "CTRL+v" on the keyboard to copy, and the software can be installed into the virtual machine.
Virtual machine and Vmware virtual machine, VirtualMachine refers to a complete computer with complete hardware system functions simulated through software, running in a completely isolated environment System
Step 1. Create a VM virtual hardware environmentRun the VM software to create a new virtual machine.
As shown above, select "New Virtual Machine" and "Customize" to create a more flexible and specially configured virtual machine system.
In the picture above, select the system type to be installed in the virtual machine in the future. Here is Microsoft Windows. Select the version to install. WindowsServer2008R2x64. At this time, the VM simulates a hardware platform that supports a 64-bit operating system.
As shown above, set the virtual machine system to the data storage location of the real host computer system, such as F:. Note F: The partition must have enough disk space. In the figure above, select the number of CPUs of the hardware platform simulated by the VM.
As shown above, set the memory of the virtual machine and set the size according to the requirements of different operating systems. Because WindwosServer2008R2x64 is installed, it is recommended to set 1024M. Set the network connection method of the virtual machine, use Network Address Translation (NAT), configure the virtual machine to use the host's network address to share the network connection, and you can directly connect to the Internet after installing the system without any settings.
As shown in the figure, for the type of virtual machine hard disk interface, select SCSI server hard disk interface. If you are installing the XP operating system. You can only choose the hard disk type with IDE interface, because the XP operating system cannot install hard disks with SCSI interface by default, but it can support SCSI hard disks by installing the SCSI driver.
As shown in the figure: Set the hard disk size of the virtual machine system. Because the WindowsServer2008R2 operating system is installed, it is recommended to set it to 40G.
Step 2 Install WindowsServer2008R2Create a virtual device system that supports WindowsServer2008R264-bit operating system, click CD/ROM (IDE) in the virtual machine configuration, and add the windowsServer2008R2 CD image file ISO in the path. Add the image file to the CD/DVD drive of the virtual machine.
Open the virtual machine and select the operating system language to be installed, Chinese (Simplified), keyboard input method Chinese (Simplified) - American keyboard
p>
Select the operating system version to be installed. Windows server 2008r2Rnterprise is fully installed. This version is a typical installation version of typical enterprise server applications.
Select the installation type. The upgrade installation requires that the corresponding version of Windows 2003 is installed on the front of the computer. Customize a new installation. Select "Customized" new installation
Create a new partition of size 20G through the drive "Advanced" option for Windows 2008r2 system installation. At the same time, the installation program will automatically generate a "system partition" with a size of about 100M, which stores the boot loader. The "next step" will enter the WindowsServer2008R2 file copying stage.