mac虚拟机怎么安装(mac怎么安装虚拟机教程)

The files required to install MacOS
3. VMwareWorkstation crack and install macos patch
4. MacOSXMountainLion download
5. 7zip download
6. Softdisk download
Install virtual machine:
1 .The first is to install the VMware virtual machine. The process is very simple. Just keep going to the next step. There is no rogue software bundled. Then it is Chinese version, which is also simple. Just keep going to the next step
2. Then apply the vmmacOS patch and unzip it. Find , right-click and select window7 administrator to run. After completion, restart the computer
Extract the installation package:
1. Install 7zip
2. Right-click the downloaded MacOSXMountainLion image: , select 7-zip------ to open the compressed package
2. Double-click
3. Select , click Extract above, and then select the directory to extract the file
4. Open FDD, click File----Open , select the file you just extracted
5. Select Tool-----Format Conversion
6. Set the input folder, then select the standard ISO and click Convert
Set the virtual machine
1. Create a new virtual machine
2. Select Custom (Advanced) and next step
3. Directly next step
4. Select me to install the operating system later, then next step
5. Select APPLEMACOSX, then select 10.764bit
6. Set a virtual machine directory, and then next step
7. Set the number of CPUs
8. Set the memory, above 2G Well, it’s too small and it’s uncomfortable to use
9. Select NAT
10. Go to the next step
11. Select a single file to store the virtual disk
12. Go to the next step
/>13. Click Edit Virtual Machine Settings
14. Click Hard Disk---Advanced----Set to SCSI0:1
14. Remove the floppy drive, useless stuff
15. Here on the CD, select the ISO you just converted
Start installing Mountain Lion
1. Have you seen this famous disabled Apple logo? Wait a moment
2. Select Chinese
3. Utility tools ---Disk Utility
4. Select the number of partitions and the partition to be installed
5. Click Continue
6. You can only click Agree, no choice
7. Finally You can start the installation. It takes a bit long. It took me nearly half an hour. I went to have a meal, pooped and then came back
8. OK, after going to the toilet and eating, the installation was finally completed. It seems that it is only available in China. , just go to the next step
9. After selecting, the virtual machine will not be synchronized
10. Choose whatever you want, it is useless anyway
11. Create an ID, enter your account and Password
12. Continue to choose randomly
After installation, start using MAC

First we download the VMware10 virtual machine from the Internet. The tenth version. I downloaded the Chinese version. The editor will not talk about installing the virtual machine in this experience. Installed, I have a separate tutorial. As shown in the picture, my virtual machine has an XP system. Because I have written some software, only XP can run it. We just open the virtual machine
2
The Chinese software is fine. Let’s take a look and click to create a virtual machine. Normally when we install a virtual machine, we choose Typical because it is recommended. For Apple systems, we choose Custom (Advanced) here. Click Next
3
Here we select workstation8.0, and then we click Next to create a new virtual machine wizard. We choose to install the operating system later. Click Next
4
Select the guest operating system, we choose other and find FreeBSD64 bit. Click Next, virtual machine name and location, we can name and choose the location ourselves, click Next
5
Processor configuration, we choose 2, which is dual core, click Next, select For virtual machine memory, we'd better choose 2g of memory. Otherwise, the memory will be small and it will be very slow. Now select the network and choose the second one (NAT). Click Next
6
In these two steps, we will default to his choice, the (recommended) option, click Next. If it is different from the picture. Everyone needs to change it.
7
Select the disk, select the first one, and create a new virtual machine disk. Select the specified capacity size, which must be greater than 20G. Here I mark 40G.
8
Manually select the virtual disk storage path. The basic settings of the virtual machine are created, click Finish.
9
After completing the settings, it will jump to the home page. We click to edit virtual machine settings.
10
Jump to this page and you will see the options we set before, which can also be modified. We click on the CD and an advanced will be displayed later. We select advanced and select sics format selection. sics0:2, click OK.
11
For the display, we check the box to accelerate 3D images. The basic settings are done. Then we need to modify something. We find the directory we just created and find the .vmx format file with the suffix.
12
We use notepad here and open it. Let's search for guestos. Shortcut key ctrl+F
13
Change guestos "freebsd-64" to guestos "darwin10" and then save the text and change it later. Then restart the virtual machine.
14
After restarting, we continue to open and edit the virtual machine settings. Switch to options above. The later virtual machine version can be changed to maosxserver10.6 haha. Go back to the hardware settings, find the optical drive item, and click on the iso image file
Find the Apple system in iso format that we downloaded online, and fill it in. Click OK and the entire setup is complete. There are many downloads on the Internet, about 3-4G. Here we can finally choose to start this virtual machine.
Here we click Enter and jump directly to the installation. If you don't click Enter, you will always be on this page. Of course we choose here, Simplified Chinese, click the arrow below
Here we click to continue, there are many terms, let’s take a brief look, click I agree, the hard disk will not be found here, we click Practical above Tools---Find Hard Disk Tools
Look directly at My Settings, select journal mode, and then select Erase, just like our formatting. After erasing, we click Close in the upper left corner. The first red one is Close.
After closing, there will be a hard drive here. We select the hard drive. Click Install. It is being installed. It may take a while. Are you a little excited?
The installation is complete and it will restart automatically. After restarting, the default is the CD-ROM drive. We click Enter on the right to enter the system and restart here. When we see a large series of numbers, we can’t even understand them. Don’t worry about it. Restarting here will be very slow, we will wait patiently
The mouse will be stuck for a while, please wait. Then click Continue. Just click Click to continue.
The information will not be transmitted here temporarily. Click Continue. At this point, just click Continue. We are about to register. Be sure to remember. You will need to enter the power-on password later.
Don’t fill in anything here, just continue---continue, here we need to create a power-on password and other things. Select a time zone
The installation was successful. We can now enjoy the Apple system.

First of all, your computer needs to support hardware virtualization. You can use securable to detect it. As shown in the picture, it means it is supported, which means it can be used in the virtual machine of your computer. Install the Apple system inside. If one of the items is NO, then sorry, you cannot install it
2
Secondly, your computer must install a virtual machine in advance
3
The preparations are done, let’s start the formal installation, open the virtual machine, and choose to create a virtual machine
4
Select custom because you need to set some options for easy operation, and then click next
5
The version of the virtual machine you installed is displayed here. Select the default and click next
6
Installation of Apple system and Windows The installation is different, you need to select the last item here, stand-alone next
7
Just choose the default here
8
The name can be your own Just choose any one. The save path can be changed, but it is not recommended that you do this. It is best to use this default path. Make sure the stand-alone next
9
At least dual core must be selected here, and then click next
10
It is recommended to set the memory to 2G for smooth operation
11
Select the default NAT network to facilitate Internet access in the virtual machine
br/>
12
Select default, stand-alone next
13
Select the first option, click next
14
It must be noted here that Apple only supports scsi mode, so this item must be selected
Select the disk size, at least 20G. It is recommended to choose the second item below, the third item is also acceptable
< br/>Select the path where the virtual disk is stored, you can select it manually
Click finish to complete the creation
After the creation is completed, you need to set up the virtual machine
< br/>Delete the default floppy drive
Select scsi mode
Find the vmx file in the path of the virtual machine you saved, open it with Notepad, and change guestOS="freebSD inside -64" is changed to guestOS="darwin10"
Install the ios image
Just start the virtual machine on a single machine, and then the virtual machine will automatically install the Apple system, no more here One by one introduction, foolproof installation, just like win7
The Apple system installation is completed, enter the Apple system

　1
First of all, your computer needs to support hardware virtualization, which can be detected with securable, as shown in the figure Supported, it means that you can install the Apple system in the virtual machine of your computer. If one of the items is NO, then sorry, you cannot install it
　2
Secondly, your computer It is necessary to install the virtual machine in advance
　3
After the preparations are done, let’s start the formal installation. Open the virtual machine and choose to create a virtual machine
　4
Choose custom, because You need to set some options for easy operation, then click next
　5
The version of the virtual machine you installed is shown here, select the default, click next
　6
< br/> The installation of Apple system is different from that of windows. Here you need to select the last item, stand-alone next
　7
Just choose the default here
　8< br/>
You can choose a name at will. The save path can be changed, but it is not recommended that you do this. It is best to use this default path and determine the next of the single machine
　9

　At least dual-core must be selected here, and then click next
　10
　It is recommended to set the memory to 2G for smooth operation
　11
　Choose the default NAT network, convenient for surfing the Internet in the virtual machine
　12
　Select the default, stand-alone next
　13
　Select the first option and click next
/> 14
It must be noted here that Apple only supports scsi mode, so this item must be selected
15
Select the disk size, at least 20G, the following suggestion Select the second item, the third item can also be selected
16
Select the path where the virtual disk is stored, you can select it manually
17
Click finish to create Completed
　18
After the creation is completed, you need to set up the virtual machine
　19
Delete the default floppy drive
　20

Select scsi mode
21
Find the vmx file in the path of the virtual machine you saved, open it with Notepad, and change guestOS="freebSD-64" inside guestOS="darwin10"
　22
Install the ios image
　23
Just start the virtual machine on a stand-alone machine, and then the virtual machine will automatically install Apple The system will not be introduced one by one here. The fool-proof installation is the same as win7
　24
The Apple system installation is completed, enter the Apple system