当前位置：首页 > 虚拟机 > 正文

虚拟机的设置步骤(虚拟机完整设置)

虚拟机
2023-12-29 22:46:50
8441

How to set up a virtual device node for a virtual machine

Today I will introduce to you the specific steps on how to set up a virtual device node for a virtual machine.
1. First we need to open VMware and enter the page as shown.
2. Click the plus icon in the upper left corner of the page.
3. In the expanded menu, select the current system, win7, and click.
4. Then on the page that opens, click Hard Disk Options
5. Continue on the right side and click the Advanced button below.
6. On the opened advanced page, click the drop-down icon.
7. In the menu that opens, select the device node.
8. Finally, click OK.

What are the steps to set up a shared graphics card for a virtual machine?

The steps for setting up a shared host graphics card for a virtual machine are as follows:

1. Open the virtual machine, click Virtual Machine → Install VMwareTools.

2. Enter the installation wizard using VMwareTools and click Next.

3. Select typical installation, next step, and wait for the installation to complete.

4. When prompted whether to restart, select Yes. After restarting, you can directly drag the files in the host to In the virtual machine, you can also directly drag the files in the virtual machine to the host.

Extended information:

The function and working principle of the graphics card

1. The purpose of the graphics card is to display the display required by the computer system. It converts information to drive the display, provides line scan signals to the display, and controls the correct display of the display. It is an important component connecting the display and the personal computer motherboard, and is one of the important devices for "human-machine dialogue".

2. The working principle and mode of the graphics card

The graphics card is inserted into the expansion slot on the motherboard. It is mainly responsible for converting the display signals sent by the host to the monitor into general electrical signals, so that the monitor can understand what the personal computer is asking it to do. The main chip of the graphics card is called the "display chip" and is the main processing unit of the graphics card. The graphics card also has memory similar to computer memory, called "display memory", or video memory for short.

How to set the virtual machine's bios first boot to USB disk [Tutorial]

Sogou High-speed Browser is not only a browser, but also a powerful assistant for efficient and safe network browsing. This dual-core browser combines high-performance optimization technology with extremely fast web page loading capabilities to provide you with an unprecedented smooth experience. Equipped with an advanced security protection system, Sogou High-speed Browser provides all-round protection for your online life. Visit to download and experience it now.
Can a virtual machine be started with a USB disk? How to set up a USB disk for a virtual machine? Today IT Encyclopedia personally writes for you a tutorial on how to enter the USB boot disk made by U-Start into the virtual machine:
/>There are three steps in total: install, create a virtual machine and prepare a bootable USB disk - add a USB disk device to the virtual machine - set the first item of the virtual machine bios startup item to the USB disk
　[Prerequisites]
　1. A USB disk that has been used to create a bootable disk has been created using u boot.
　2. Install the virtual machine (VMwareWorkstation) to the computer system.
[Tutorial on setting up a virtual machine USB boot starts]
Step 1: First insert the USB boot disk into the USB socket at the rear of the computer host box. (The system must be able to recognize the USB disk!)
Step 2: Run the virtual machine (VMware Workstation) software, and then create a new virtual machine. (The steps to create a virtual machine are not introduced in detail here. ), and then add "Hardware Device" to the virtual machine,
1. Click on the created virtual machine, and then click "Edit Virtual Machine Settings" in the right window, and then a window will pop up:
2 .Click the "Add" button in the lower left corner of the pop-up window, and another window will pop up
3. As shown in the picture above, click the mouse to select "Hard Disk", then click the "Next" button to continue, and click Next The screen that appears in one step is as shown below:
4. As shown in the picture above, click to select "Use physical disk (for advanced users only) (P)", and then click "Next" button to continue, and then enter the next screen
5. After clicking the mouse to select "Device", there are two devices for us to choose from, namely: "PhysicalDrive0" and "PhysicalDrive1". We select the "PhysicalDrive1" device, which is selected by default. "Use the entire disk (E)", select and click the "Next" button to continue.
6. Click the "Finish" button! Now we have completed the operation of adding a USB disk device to the virtual machine. We now see that there is a "new hardware (SCSI)" in the virtual machine's device. This is what we just Added device. What we have to do now is to click the "OK" button and then continue the operation, as shown below:
Step 3: Enter the virtual machine to set the BIOS startup item. First boot to the USB disk, click "Open the "Virtual machine power supply",
uStart editor's warm reminder: When we click "Turn on the virtual machine power supply" with the mouse, immediately press the "F2" key continuously to enter the virtual machine BIOS setting interface (remember: it is continuous immediately. Press the F2 key! It won’t work any slower)
Enter the BIOS setting interface, then we press the left and right arrow keys (← is the left arrow key, → is the right arrow key), and move the key that stays on the "Main" option Move the cursor to the "Boot" option, and press the "+" key to move "+HardDrive" to the first position, then press the "Enter key". Several options will appear, and then move the "VMwareVirtualSCSIHardDrive(0:0) )" (that is, the USB disk device we just added) moves to the first position (moving method: press the up and down ↑↓ direction keys), as shown in the following two pictures:
When all are selected, we press Press the "F10" key. When the confirmation window pops up, we press the "Enter key" to save and exit. Then it will automatically restart the virtual machine! After restarting, it will automatically start from the USB disk! As shown below:
< br/> At this point, the virtual machine has been set up to set the BIOS first boot to the USB disk. Do you want to try it?
Choose Sogou High-speed Browser to make your online life more convenient and efficient. This dual-core browser not only provides lightning-fast page loading speeds, but also has comprehensive security features to ensure you enjoy fast browsing while being protected from online threats. Don't wait, visit now to download Sogou High-speed Browser and experience a new realm of web browsing.

How to open virtualization settings on a computer?

First enable and install the virtual machine in the BIOS settings, and then install the virtual machine under the system.

1. Start virtualization settings under BIOS:

Intel platform

1. After the computer is turned on, immediately press the 'delete' key on the keyboard to enter the BIOS [EZMode] page

2. Press the F7 key on the keyboard to enter AdvanceMode, as shown in the figure below:

(If you press the 'delete' key on the keyboard after turning on the computer, you will enter AdvanceMode. BIOSAdvanceMode, there is no need to press the F7 key on the keyboard)

3. Click the [Advanced] page and click the [CPUConfiguration] option

4. Click the [Intel (VMX) Virtualization Technology] option and set it to [Enabled]

5. Press the F10 key on the keyboard and click [Ok] to save the option. After the computer restarts, the BIOS settings can be completed

AMD platform

1. After the computer is turned on, immediately press the 'delete' key on the keyboard to enter the BIOS [AdvancedMode] page

2. Click the [Advanced] page and click the [CPUConfiguration] option

3. Click the [SVMMode] option and set it to [Enabled]

4. Press the F10 key on the keyboard and click [Ok] to save the options. After the computer restarts, the BIOS settings will be completed

Second, install the virtual machine under the system.

1. Click Search and enter "Control Panel"

2. Click [Uninstall a program]

3. Click [Turn Windows features on or off]