虚拟机怎么使用远程桌面连接(虚拟机远程桌面连接命令)

How to connect to a virtual host through remote desktop

How does the virtual machine access the host through IP?

Set up the network correctly and enable relevant external services. Use the correct IP address to access it.

1. Open the network settings in the VMware virtual machine settings, and the network adapter created according to the classic mode is usually NAT mode. This mode is the mode of sharing the host IP, which is the IP address of the physical machine. It is one level higher than the IP address in the virtual one.

2. In this mode, after obtaining the correct IP address of the virtual machine, you can use the physical machine to access the services in the virtual machine.

3. If you want other machines in the LAN to access the virtual machine, you can set the network mode to bridge mode. At this time, the IP address obtained by the virtual machine is the same as the physical machine. A network segment is also a network segment with other machines on the LAN, so it can also be accessed by other machines on the LAN. Extended information: Main functions of VMWare virtual machine 1. You can use more than two operating systems on the same PC without partitioning or restarting. 2. Completely isolate and protect the operating environments of different OSs and all application software and data installed on the OS. 3. Different OSs can also interact with each other, including network, peripherals, file sharing and copy and paste functions. 4. Has recovery (Undo) function. 5. Be able to set and modify the operating environment of the operating system at any time, such as: memory, disk space, peripheral devices, etc.

How to establish a virtual host in the router to achieve remote access?

First of all, you must first determine whether your router has this function. I am taking the tp-ling router as an example. Log in to the router management page, click on device management, enter the device management page, and select the DMZ host switch option. "Open", fill in the IP address you want as the DMZ host in the DMZ host IP address, and then click "Save". In this way, the "DMZ host" setting is completed.

How to connect the host and virtual machine to the network?

The network of the virtual machine is actually very simple.

There are 4 modes for virtual machines to connect to the network. The prerequisite is that when selecting hardware, you must choose to connect to the network! The simplest is that the mode is NT mode (usually the 3rd option). This mode is a public IP with the host, as long as the host can access the Internet, the virtual machine is fine; the other is bridging (usually the 1st option), which is to choose a network card. Let the virtual machine use it, and the host cannot use the network card in the bridged state! There is no need for the other two posters to study whether they are used to set up a virtual LAN or the like! The above content is for reference only!

How to use virtual host?

How to use virtual host?

First of all, the first thing to do is binding resolution. Binding resolution includes the two steps of domain name resolution and domain name binding. After opening the virtual host, the service provider will require users to use the domain name as the main development domain name. It should be noted that the domain name and the host are configured and registered together, and you can also register yourself. Only in this way can you use the domain name after the host is opened. The default domain name URL is successfully bound. If there are many service sites, you need to add additional value to the web page after binding the domain name.

Secondly, after binding the domain name resolution, the domain name resolution needs to be operated and resolved on the management page. Or connect to the service domain name provider and point the domain name to the host configuration. However, if you use the host provider to register or configure, the system can be automatically upgraded during the host configuration and activation, and wait for the resolution to take effect.

Finally, upload the web page and how to use the virtual host. This is the most critical step. It can successfully parse the default page of the host. The next thing to do is to parse the web page and program. The web page uses different configuration tools or the website is successfully generated in the background of the host. The host directory is generally divided into website sites and the root directory uploaded to the website needs to be moved or decompressed in time. Users need to operate according to their actual situation to ensure that the entered domain name is on the correct page.

Hope it helps!

How to operate

Right-click on My Computer and enter 'Properties' and click on 'Remote Settings' in the left menu bar ; Set the Remote Desktop options to 'Allow connections from computers running any version of Remote Desktop'.

Remote desktop connection must set a password before it can be connected. This time, use cmd to quickly change the password. After entering cmd, enter 'netuseradministratorhqifeng' (administrator is the user name, hqifeng is the power-on password I set). The command is successfully completed and the setting is successful.

Use another computer (a virtual machine is also available) to open the run command and enter 'mstsc', and click the option under Remote Desktop Connection. Set experience performance to maximum.

Enter the remote IP address in the input box, click 'Yes' when asked whether to connect, and then enter the account and password to remote.

Finally, the remote LAN remote desktop connection was successful. Successfully logged in to your computer.