虚拟机中安装windows7详细教程(安装虚拟机win7的步骤)

1. Open the VMware Workstation 12 virtual machine, click the [Create New Virtual Machine] button, and a pop-up window will let him default, and then Click Next,

2. Click the [Browse] button, select the iso file, and then click [Next],

< /p>

3. By default, click Next.

4. Change the name of the virtual machine, change the installation location, and click the [Browse] button. Change, the demo is changed to the D drive.

5. No need to change here, just click Next, then click [Finish],

6. Then click Turn on the virtual machine. Wait patiently if the startup time is slow. When the blue interface appears,

7. Use the up and down keys on the keyboard to select "Run Windows PE". Microsoft System", wait for loading,

8. Enter the PE interface, select [Hard Disk Management Tool], partition, save, and return to the desktop.

9. Click [Automatically install system] on the desktop to open the installation system interface,

11. In the installation system interface, wait for the progress bar to complete the installation and automatically restart. Restarting the installation system is slow (about 30 minutes). At this time, you can do other things. Let it install and boot automatically.

12. Complete the renderings.

How to set up a VMware virtual machine

1. After installing the virtual machine VMware, you can connect to the network You can see two more virtual network cards, VMwareNetworkAdapterVMnet1 and VMware
NetworkAdapterVMnet8, as shown in the figure.

2. Set up the network, use a wireless network (if it is a local connection, the setting method is the same), right-click and select Wireless Network Connection, select Advanced in the properties window, and select Allow. Other network users connect through this computer's Internet connection, and at Home Network Connection, select VMware
NetworkAdapterVMnet8, as shown in the figure, and confirm.

3. Check the network connection properties of VMwareNetworkAdapterVMnet8 and it is automatically set to 192.168.0.1, 255.255.255.0.

4. Start the virtual machine, enter the virtual machine operating system, set the network connection of the virtual machine, set the IP to 192.168.0.2, the subnet mask to 255.255.255.0, and the gateway is 192.168.0.1 (the gateway is the IP address of VMware
NetworkAdapter
VMnet8 virtual network card), and the DNS is set to the DNS of the host network connection, (the DNS of the connection to the external network is used to connect to the wireless network , so just find the DNS of the wireless network connection. If it is a broadband connection, it is the DNS of the local connection).

This article will introduce the installation steps of win7 virtual machine, including installation method, installation image, system name, virtual hard disk size, partition, etc.
👨‍💻Select Typical Installation Mode
Select Typical Installation Mode on the Installation Mode panel.
🖼️Select the installation image
Select the installation image and navigate directly to the location where the win7 installation image is downloaded and stored.
🖥️Select win7 system
The system name selected to install is win7, and the 32-bit win7 system is installed. Then take the next step.
💾Set the virtual hard disk size
Set the virtual hard disk size for the win7 system. Because the win7 system itself is relatively large, just use 60G according to the system default. If the hard disk space is insufficient, you can also use more than 30G. can.
🔧Complete the pre-installation preparation tools
Click Finish to complete the pre-installation preparation tools.
🔌Turn on the power of the virtual machine
Turn on the power of the virtual machine and turn on the virtual machine. The operation at this time is basically the same as the computer button. You can press ctrl+alt+enter to maximize the virtual machine, and then operate .
💽Partition the hard disk
Choose to partition the hard disk, because the hard disk is 60G. If not partitioned, there will be only one c drive after installation by default. The hard disk is partitioned. This partition is in the virtual machine. It is done inside, so it will not affect the local system.
📀Clone image installation
Start the clone image installation.
🔄Restart the virtual system
The system is cloned and then automatically restarts.

VMware virtual machine can simulate running multiple different operating systems on one computer, including reading U disk and connecting to the network. , there are many users who want to use a USB boot disk to install the win7 system on VMware, but don’t know where to start. For this reason, the editor will bring you the method of installing the win7 system on a VMware virtual machine using a USB disk as follows.

1. Preparation tools

1. Install VMware virtual machine 12

2. U disk of 4G or above,

3. ghostwin7 system :
2. Steps to install ghostwin7 system with VMware12 using U disk

1. Run the VMwareWorkstation12 virtual machine and click "Create a new virtual machine";

2. Open the new virtual machine Computer wizard, select "Typical (recommended)", next step;

3. Select "Install operating system later", next step;

4. Select Microsoft Windows for the client system, Select Windows 7 for the version, and select Windows 7x64 if it is 64-bit;

5. Name the virtual machine, select the save location, next step, keep other default settings, and finally click Finish;

6 , close the virtual machine, insert the USB boot disk, then open the virtual machine, select the newly created virtual machine windows7, click "Edit Virtual Machine Settings", click "Add";

7. Select the hardware type " "Hard disk", keep the "Recommended" option for the disk type, and select "Use physical hard disk";

8. Click the "Device" drop-down box and select PhysicalDrive1. Next, if there is no PhysicalDrive1, restart the virtual machine;

9. After the settings are completed, right-click Windows 7 and select "Power" - "Turn on the power and enter the firmware";

10. Enter the BIOS and press the → key to go to Boot. Select HardDrive, use shift and + to move it to the first position, expand HardDrive, move HardDrive (0:1) to the first position, press F10 to save and restart;

11. After restarting, insert the PE installation USB flash drive, you can view the specific operation steps, and just follow the steps to complete the installation.

The above is how to install the win7 system on a VMware virtual machine using a USB flash drive. Users in need can follow the steps above.