惠普笔记本如何开启虚拟化(惠普笔记本怎么开启vt虚拟化)

1. First turn on the HP computer. When the logo appears, press and hold the DEL key to enter the bios interface.

2. The interface you just entered displays the main information interface of the computer. Switch to the Advanced tab and find the CPU virtualization setting item, or VT-X, VT- D.

3. Select CPU virtualization, press Enter to modify its value, change it from off to on, and from disable to enable.

4. After turning it on, press Enter to confirm. This completes the CPU virtualization settings.

5. At this time, press F10 and a popup will pop up to confirm whether to save the changes and exit. Click yes, so that the settings will take effect.

1. Press and hold F12 to enter bios when booting. After entering, select the Configuration option, select Intel Virtual Technology and press Enter. Note: If there is no VT option or cannot be changed, it means that your computer does not support VT technology.

2. Move the cursor to Enabled and press Enter to confirm.

3. At this time, the option will become Enabled. Finally, press the F10 hotkey to save and exit to turn on the VT function.

What is VT:

vt is the abbreviation of English Virtualization, which means virtualization. In computers, virtualization (English: Virtualization) is a resource management technology that abstracts and converts various physical resources of the computer, such as servers, networks, memory, and storage, to break the barriers between physical structures. Indivisible barriers allow users to apply these resources in a better way than the original configuration. These new virtual portions of resources are not limited by how existing resources are deployed, geographically or physically configured. Generally referred to as virtualization resources include computing power and data storage.

In actual production environments, virtualization technology is mainly used to solve the problem of overcapacity of high-performance physical hardware and the reorganization and reuse of old hardware with low capacity, and to make the underlying physical hardware transparent, thereby maximizing of utilizing physical hardware.

The specific steps to enable IntelVT-x on HP computers are as follows:

1. First turn on the computer and click the "esc" button when it is first turned on.

2. Then press the "F10" button in the pop-up window to open "Setup BIOS".

3. Then click to open the "System Settings" option in the pop-up window.

4. Then you can see the option "Processor Virtualization Technology". The processor virtualization technology is the vt to be set. Use the direction key to select processor virtualization technology, press f5 or f6 to change the on or off status, and turn it on.

5. After setting, select f10 to save and exit

1. First, take an HP laptop as an example. Press F10 to enter bios while booting. For other computers, choose between F1-F12, or ESC or Del.

2. Enter the bios interface and select the system configuration option, which means system settings.

3. Enter the system settings interface, you can see the Virtualization Technology option, referred to as VT, and the disabled option is displayed at the back. That means it is not enabled. Press Enter to change the option.

4. After that, a window for selecting options will pop up. Here, select the enabled option, which means enabled.

5. After the final change is completed, remember to save it to take effect. Press the F10 button on the keyboard, and then select the yes option in the window to save the changes, and then the computer will restart. , at this time CPU virtualization is successfully enabled.

Extended information:

Virtualization (Virtualization) is a resource management technology. To enable CPU virtualization, it not only requires CPU support, but also The motherboard itself also supports virtualization functions. This function needs to be turned on in the BIOS advanced selection of the motherboard.

To enable virtualization, you need to enter the BIOS settings. : After starting the computer, before entering the Windows operating interface, keep pressing F12 on the keyboard to enter the BIOS.