内存频率只有3000(内存频率选项没有3000)

The reason why the memory frequency of 3600 can only be adjusted to 3000 is because the memory already has some things in it, so it can only be adjusted to 3000

1. This is the frequency of the memory, 2400MHz, 3000MHz, and 2800MHz. The choice of memory should be based on the motherboard parameters. If the frequency is too high and the motherboard does not support it, it will be difficult to use. If there are two memories with different frequencies, the higher one will automatically reduce the frequency and cannot perform as well as it should.
2. The frequency of the memory module refers to the main frequency of the memory, which refers to the highest working frequency that the memory can achieve. There are two ways to express it, namely the working frequency and the equivalent frequency. The working frequency is the actual working frequency of the memory particles. The equivalent frequency is different. The equivalent frequency of DDR memory is twice the operating frequency, and the equivalent frequency of DDR2 is four times the operating frequency.
3. MHz has a higher frequency than 2400, and the memory timing numbers are also higher. The 2400 frequency storage module has XMP function, and any frequency can be freely set in the BIOS. Anything from 2400 to 3000 is fine.
4. Play the role of a bridge between the hard disk and the CPU. 2400 represents the frequency of the memory, which is the speed of the memory. It represents the highest operating frequency that the memory can achieve. Memory clock speed is measured in MHz (megahertz). Therefore, the memory module 2400 represents a memory with a main frequency of 2400MHz that complies with the DDR standard.
5. and 1600 represent the memory frequency. The higher the frequency, the faster the memory operation speed, the better the memory, and the higher the price. Introduction: The memory module is a computer component that the CPU can address through the bus and perform read and write operations. Memory sticks used to be an extension of main memory in the history of personal computers.
6.: The difference between 2400 and 3000 is the frequency. Now the performance of memory modules is also excessive. It can be said that there is no difference between the two memories. 2: This motherboard supports DDR4 memory, which is the 4th generation memory. There is no requirement for frequency. 3: Different brands and different memory sizes do not affect the use, as long as they are of the same generation of memory.

MSI B350MGAMINGPRO motherboard supports AMDAM4 series processors and DDR4 memory. According to the official website, this motherboard supports memory frequencies of 2133-3200 (OC) MHz, so 3000MHz memory sticks can theoretically be used. However, it should be noted that due to different memory stick brands, models, quality and other factors, some memory sticks may have incompatibility or stability issues when overclocked. Therefore, when purchasing memory modules, it is recommended to choose a brand that meets the requirements of the motherboard, is of good quality and has a good reputation to avoid unnecessary problems. In addition, you need to insert the memory module into the correct slot and make the corresponding settings in the system BIOS to ensure that the memory can work normally and stably.