vm虚拟机共享主机显卡(虚拟机共享主机显卡)

Why do everyone say it can?
Why in my memory, the virtual machine cannot do this function?
Tangled.
The original poster went to check out the Virtual Machine Home, which is dedicated to playing this game.
Go to the group there and ask.
In order to open more karts, I used a virtual machine. As a result, the virtual graphics card cannot support D3D9 acceleration (my physical graphics card is 8800GT)
As a result, the driver file was replaced and the configuration file was modified. . . It took a long time to get over.
At least in the conventional VM virtual machine settings, this operation cannot be completed. . . . .

1. Enter the BIOS of the host ready for graphics card pass-through. Turn on VT-x and VT-D in settings. Disable integrated sound and integrated graphics. The disk uses AHCI mode.
2. Use the USB disk to boot and install ESXi6.5. Press F2 to perform some configurations on ESXi on this host.
3. At the bottom of the ESXi6.5 interface, you can see an IP address. Open another computer, enter the IP address in the browser, log in using the account and password you just set, and then enter WebClient to configure ESXi.
4. Go to Navigator->Host->Manage->Hardware->PciDevices on the left side of the page to see each hardware. Add a virtual machine again, Navigator->VirtualMachines->Create/RegisterVM. The various options for installing a virtual machine are basically the same as the steps for adding a virtual machine in the Vmware software.

The steps for setting up a shared host graphics card for a virtual machine are as follows:

1. Open the virtual machine, click Virtual Machine → Install VMwareTools.

2. Enter the installation wizard using VMwareTools and click Next.

3. Select typical installation, next step, and wait for the installation to complete.

4. When prompted whether to restart, select Yes. After restarting, you can directly drag the files in the host to In the virtual machine, you can also directly drag the files in the virtual machine to the host.

Extended information:

The function and working principle of the graphics card

1. The purpose of the graphics card is to display the display required by the computer system. It converts information to drive the display, provides line scan signals to the display, and controls the correct display of the display. It is an important component connecting the display and the personal computer motherboard, and is one of the important devices for "human-machine dialogue".

2. The working principle and mode of the graphics card

The graphics card is inserted into the expansion slot on the motherboard. It is mainly responsible for converting the display signals sent by the host to the monitor into general electrical signals, so that the monitor can understand what the personal computer is asking it to do. The main chip of the graphics card is called the "display chip" and is the main processing unit of the graphics card. The graphics card also has memory similar to computer memory, called "display memory", or video memory for short.