当前位置：首页 > 虚拟机 > 正文

虚拟机一键去虚拟化教程(虚拟机开启虚拟化)

虚拟机
2023-12-29 13:34:09
5401

How to de-virtualize VMware6.0 virtual machine?

Run VMWareWorkstation3.0
Enter the main interface, select File->NewVirtualMachine (you can also directly click the icon on the right side of the main interface), a dialog box will pop up, click Next, select Linux in the Guestoperatingsystem drop-down list ,
Click Next and select where you want to place the virtual machine files. Continue to click Next and choose the second NAT option here (I suggest you can also choose something else). This method can also achieve bidirectional access between HostOS and GuestOS. However, other machines in the network cannot access GuestOS. GuestOS can use the NAT protocol to access other machines in the network through HostOS. OK, click Finish!
Now select the virtual machine we just created under VirtualMachineName on the main interface,
Open Setting->ConfigurationEditor to set up. I will only talk about one thing: how to add a virtual hard disk, and the rest will be done by yourself Go and click Add at the bottom, a dialog box will pop up, select HardDisk, click Next, then Next, adjust the virtual hard disk size here, note that the bit is Gb, click Next, !
Start the real process Installation:
If it is a physical CD, please put the first disk into the CD-ROM drive. . .
ifnot, open Setting->ConfigurationEditor, select DVD/CD-ROM,
Look at the right side of the dialog box: select UseISOimage...
Okay, return to the main interface, click PowerOn .. . . .
Step 1: Step 1: Choose the installation method. 1. Graphical installation (press Enter directly) 2. Text installation (enter linuxtext)
Step 2: Select "OK" to check the CD and select "Skip" to skip checking. I confirm my disc is good, I skip it!
Step 3: This paragraph is a waste of words, skip it!
Step 4: I chose Simplified Chinese because I am Chinese and I participated in the Anti-Japanese Parade in Shanghai two days ago! But it doesn’t matter if I choose Korean, because I also know a little bit of Korean!
Step 5: This step is for you to choose your keyboard. I have used the current keyboard, and apart from the US one, I have never used any other keyboard! Next step!
Step 6: Let you choose the mouse. Even if you don’t know what type of mouse you have, it doesn’t matter, because we will all use characters in the future, and it doesn’t matter if you have a mouse or not!
Select the installation type. Here we choose "Server". In fact, as long as you understand it, it doesn't matter which type you choose!
Step 7: Because everyone is following me, don’t worry about whether you understand or not! We choose "manual partitioning"!
Step 8: If your hard disk has only one partition, you will see the following interface. If not, you can click to delete them! Now let’s click “New”!
Step 9: Click "New" to let you add a partition! We first add a /boot partition (think of the boot partition under Windows) with type ext3 (equivalent to FAT32, NTFS) and size 100. Just imitate my picture!
Step 10: Click "New" again and we will create a swap file system (memory swap area). In the "File System Type" column, select "swap" size: your memory 512*2= 1024, please pay attention here! The size should be set to double the size of your memory, but considering that you need to add more memory in the future, we will set it higher. If your memory limit is 2G*2=4096 in the future, then we will set it to 4096 in advance! But Linux is a low-configuration, high-performance operating system!

How to open virtualization settings on a computer?

First enable and install the virtual machine in the BIOS settings, and then install the virtual machine under the system.

1. Start virtualization settings under BIOS:

Intel platform

1. After the computer is turned on, immediately press the 'delete' key on the keyboard to enter the BIOS [EZMode] page

2. Press the F7 key on the keyboard to enter AdvanceMode, as shown in the figure below:

(If you press the 'delete' key on the keyboard after turning on the computer, you will enter AdvanceMode. BIOSAdvanceMode, there is no need to press the F7 key on the keyboard)

3. Click the [Advanced] page and click the [CPUConfiguration] option

4. Click the [Intel (VMX) Virtualization Technology] option and set it to [Enabled]

5. Press the F10 key on the keyboard and click [Ok] to save the option. After the computer restarts, the BIOS settings can be completed

AMD platform

1. After the computer is turned on, immediately press the 'delete' key on the keyboard to enter the BIOS [AdvancedMode] page

2. Click the [Advanced] page and click the [CPUConfiguration] option

3. Click the [SVMMode] option and set it to [Enabled]

4. Press the F10 key on the keyboard and click [Ok] to save the options. After the computer restarts, the BIOS settings will be completed

Second, install the virtual machine under the system.

1. Click Search and enter "Control Panel"

2. Click [Uninstall a program]

3. Click [Turn Windows features on or off]