戴尔笔记本怎么安装虚拟机(戴尔笔记本虚拟机设置)

Copy files from the computer to the virtual machine: After we open the virtual machine, click on the menu virtual machine above, and then click Install VMwareTools, but why is there a gray unable to install status? In fact, this is because your virtual machine has not been turned on yet. We can only install it after entering a virtual machine system.

This answer is applicable to most computer brands such as Dell, Asus, and Lenovo.

Hello, I cannot uninstall the virtual machine after entering safe mode. , but the blue screen problem was not solved, so I had to reinstall the system.

System installation

1) Use U disk to install the system

1. Make a boot disk. (4GU disk for W7 system, 2GU disk for XP system) Download the Laomaotao U disk creation software, install the software, start it, and follow the prompts to create the boot disk.

2. Download a system you want to install, decompress the compressed system files (the ISO system files are transferred directly to the USB flash drive) to the USB flash drive you made, and the boot disk is ready.

3. Use U disk to install the system. Insert the USB flash drive to boot, press DEL or other keys to enter the BIOS, set to boot from USB-F10-Y-Enter. Follow the prompts to install the system.

4. After the installation is completed, pull out the USB flash drive and the computer will automatically restart. Click: Start the computer from the local hard disk to continue the installation.

5. After the installation is complete, restart. Turn on the computer - enter BIOS - set the computer to boot from the hard disk - F10-Y - Enter. From now on, it will boot from the hard drive.

6. After installing the system, use Driver Life to update the driver.

2) CD installation system (with CD or burned CD)

1. Turn on the computer - insert the CD - press DEL or other keys to enter the BIOS - set the computer to boot from the CD - F10 - Y-Enter, the computer will automatically restart and enter the system installation.

2. After the installation is completed, restart. Turn on the computer - enter BIOS - set the computer to boot from the hard disk - F10-Y - Enter. From now on, it will boot from the hard drive.

3. After installing the system, use Driver Life to update the driver.