怎么看物理服务器的配置

How to check the server hardware information

Do you know how to check the server hardware information? Below is what I brought here to check the server hardware information. Welcome to read!

Methods to check server hardware information:

1. Check the server configuration using DOS commands

1. Query the number of CPUs

cat /proc/cpu information grep physical sort-nuniqwc-l

2. Query server model

dmidecodegreplm memory device storage device catalog number

:

dmidecode -s chassis serial number

12. Information about Dell servers can be obtained through DSET.

Instructions for use of DSET tool 2.2 (Windows version):

Instructions for use of DSET tool 2.1 (Linux version):

13. For Windows (win2003winXP and Later versions):

1: wmicBIOS gets the serial number (getting the SN does not apply to Lenovo machines)

Command: wmiccs product gets the name, identification number (gets the serial number and model)

The following is some information about Lenovo R510G7Windows.

2. Master Lu’s query server configuration

Some information discovered by Master Lu.

See & Methods of Viewing Server Hardware Information What People Also See:

1. Linux Methods of Viewing Hardware Information

2. Viewing Linux Hardware Information Command

3. How to check hardware information in Linux?

4. Solution to failure to view hardware information under Linux

5. What is HP server hardware diagnostic tool ProLiant?

6. Solution to Linux failure to obtain hardware information

7. What are the hardware requirements for Linux servers?

8. What are the hardware configuration requirements for a Linux server?

9. How to check the computer configuration?

10. How to test the compatibility of computer hardware?

What do you think of Inspur server CPU?

To check the CPU, you can open the chassis, remove the CPU fan, and take out the CPU from the CPU base with the power off.

In addition, you can also check it by entering the BIOS after booting the computer. After entering the operating system, query through some management software or commands. To ensure the accuracy of viewing, it is recommended to shut down the computer and remove the CPU for viewing, so that the specific model of the CPU can be accurately identified.

How to check the CPU temperature on HPE server?

You can find management software on the HP random boot CD. Can be viewed! Generally, when you install the system with a boot CD, it will be installed automatically!

Call: HPSystemManagementHomepageHPInsightManagement

Or use ILO2 to view. (It may be a little more complicated. Press F8 on boot to configure the IP and connect to the ILO2 interface behind the server. The user and password are on the small label in front of the server!)

Hello, if you want to check the server configuration parameters, take a Windows system server as an example. After logging in to the server system, you can use the DOS window and use commands to quickly check the server's configuration parameters. Configuration parameters:
1. After logging in to the server system, click Start in the lower left corner to enter the start menu.
2. In the start menu, select the "Run" icon.
3. After clicking, you will enter the running interface.
4. In the run interface bar, enter the CMD command.
5. After entering, click OK to enter the command window.
6. Enter the input interface of the command window and enter the syeteminfo command in the C user directory.
7. After the input is completed, click Enter to enter the system configuration loading state.
8. When the loading is completed, you can see the server configuration information.