cpu虚拟化显示已禁用(win10虚拟化已禁用)

"The guest operating system has disabled the CPU. Please shut down or reset the virtual machine."
Generally there are two reasons:
1. VMware virtual machine download, Incorrect installation; for example: the downloaded VMware is pirated.
2. Does the physical computer CPU support virtualization? It can also be said to check "VT-x support status" and "VT-x enablement status".
===
Most likely, your motherboard has been changed, especially if it is AMD.
If the old motherboard supports virtualization, I suggest you check the motherboard model and then check the bios. Is there any related virtualization function?
If it is Intel
The computer's bios settings have been changed, so reboot into the bios system, then enter configuration, find InterVirtualTechnology, and change Disabled to Enabled. Just start the virtual machine after turning it on.

First of all, Intel virtualization technology is not supported by all CPUs. You can check according to the specific CPU model. The ASUS single-board Intel motherboard currently on sale has virtualization enabled by default in the BIOS. Virtualization It is also divided into VT-x, VT-d and VT-c. Depending on the support of different motherboards, the BIOS will be different. Please confirm according to the specific model of the specific motherboard.

Are you asking what to do if the CPU is disabled in the virtual machine of Win10? Method:
1. Check the configuration and settings of the virtual machine to ensure that the number and type of virtual machine CPUs are compatible with the host CPU. You can try to modify settings such as the number of CPUs and virtualization options to test the performance of the virtual machine.
2. If the virtual machine's CPU does not have virtualization support enabled, performance may be limited. You can check the computer's BIOS settings to ensure that virtualization support is enabled for it, and ensure that the virtual machine software has the virtualization support option enabled. .
3. The version of the virtual machine software affects its CPU performance. If you find that the CPU performance of the virtual machine is insufficient during use, you can try to upgrade the virtual machine software and retest the performance.

You may encounter various problems when using your computer, such as the computer prompts when installing a VMware virtual machine." Virtualization technology is disabled and VT-x is not enabled." What should I do? All operations of the virtual machine are performed in a new and independent virtual system. If you encounter this problem when installing a virtual machine, the editor will take an ASUS computer as an example to explain the solution in detail.
The specific methods are as follows:
1. Take ASUS computer as an example, other computers can use Baidu to set up the method by themselves.
First turn on the computer power switch and click "Esc" quickly and continuously to enter the BIOS.
2. Then choose to enter "Advanced" - "CPUConfiguration" (Processor Settings).
3. Then find the "IntelVirtualizationTechnology" option, press Enter to set it to "Enabled", and then click "F10" to save and exit. Some users find that their laptops do not have VT. There are two situations. One is that the computer is too old and does not support VT. The other is that the computer is too new and VT is enabled by default.
4. If the "Intel Virtualization Technology" of the computer motherboard has been turned on, but the virtual machine is still upgraded and not turned on, it means that the computer has turned on the "64-bit security protection engine, which needs to be turned off to run the virtual machine normally. Turn off method: < br>5. Open the "Control Panel" on the computer host and select "WindonwsDefender" to close it;
6. The computer may turn on itself after shutting down. You can use the following method to permanently disable it.
7 , use "Win+R" to call up run, enter "" and press Enter to enter.
8. Then select "WindonwsDefender" under "Computer Configuration" ---"Administrative Templates" ---"Windows Components" "Enter, close "WindonwsDefender"---"Enabled".
The solution to the problem of "Virtualization technology is disabled and VT-x is not enabled" when installing a VMware virtual machine on a computer is shared here. I hope this tutorial will help Everyone helps.