当前位置:首页 > 内存 > 正文

明明是16g内存为什么只显示8g(16g内存为什么只显示8g)

  • 内存
  • 2023-12-29 16:14:35
  • 9404
The computer memory module and socket are all good, why does it show that 16g is available and 8g is available?
Hello, 1. When the memory is 16G but only 8G is displayed, first of all, it may be that your memory module is plugged in backwards. You can try to change it

2. If it doesn’t work, if it is Windows 7, you can check the maximum memory setting in the computer to see if it is set to 8G. If so, just change it; there is another way. The method is that if you upgrade your computer, it may be able to display 18G of memory.
3. It may also be due to the limitations of the operating system performance of the CPU's computing speed. You can only use half of your memory when reading, writing, and storing programs. Because the memory is only temporarily used to store programs. The maximum speed at which programs and data are read by the CPU is certain.
Memory is one of the important components in the computer. It is the bridge that communicates with the CPU. All programs in the computer run in the memory, so the performance of the memory has a great impact on the computer. Memory is also called internal memory. Its function is to temporarily store operation data in the CPU and exchange data with external memories such as hard disks. As long as the computer is running, the CPU will transfer the data that needs to be calculated into the memory for calculation. When the calculation is completed, the CPU will send the results out. The operation of the memory also determines the stable operation of the computer. Memory is composed of memory chips, circuit boards, golden fingers and other parts. There are many types of memory, which can be divided into main memory and auxiliary memory according to their uses. Main memory is also called internal memory (referred to as memory, and Hong Kong and Taiwan call it memory).

There is a problem with dual-channel 16G memory. The resource manager shows 16G, but only 8G is available??

Change the value here to the maximum value of installed memory, and enter [8132] for 8g. 16g input [16384]. Click [Apply] at the bottom of the interface and then click [OK]. Click [Restart], and the memory will return to normal after the computer restarts.
This computer does not detect the memory module. It is recommended to re-plug and install it into slots 1, 3 or 2, 4. This will work. My problem is with the memory module. I suggest you use an eraser to remove the gold finger of the memory module.
Hello, when the memory is 16G but only 8G is displayed, first of all, it may be that your memory module is plugged in backwards. You can try changing it.
If you are using the 64-bit regular home version, which supports up to 8GB of memory, change to the advanced system version. Check what the maximum memory supported by the motherboard is and make sure the motherboard supports 16GB of memory. Set system configuration.
One of the memory sticks was not recognized normally. There is a problem with one of the memory slots, and there is a compatibility issue with one of them. You can insert the memory separately and check whether they can all boot normally. If possible, plug the two pieces of memory into another slot and test whether they can both boot.

Why can only 8g be used after 16g of memory is installed?

1. This is because there is no setting in the system. You can set it in the system according to the following steps. After setting, the memory will display normally. . Tools: computer. Right-click [Start] in the lower left corner of the system desktop and click [Run] in the start menu.
2. Hello, when the memory is 16G but only 8G is displayed, first of all, it may be because your memory module is inserted backwards. You can try changing it.
3. If you are using the 64-bit regular home version, which supports up to 8GB of memory, change to the advanced system version. Check what the maximum memory supported by the motherboard is and make sure the motherboard supports 16GB of memory. Set system configuration.
4. In this case, it may be that it is not fully plugged in, or it may be incompatible with the original one. As for those test software, they will be detected and recognized as long as the hardware is plugged into the motherboard. However, these test software does not care whether the hardware can be used normally, so the display in the motherboard BIOS and operating system shall prevail.