内存条先插哪个槽(内存条插在哪个卡槽)

The installation method of computer memory module is as follows:

Tools/materials: HP TP01, Windows1022H2, memory module DDR4.

1. First, cut off the power and open the chassis cover.

2. The four vertical slots on the right side of the CPU slot are memory slots. They are arranged 1234 from left to right. Slots 2 and 4 have higher priority than 1. 3 slots.

3. There is a buckle next to the memory module slot, which can be opened with just a slight pull.

4. Take out the memory stick (be careful not to touch the gold finger). There is a small gap in the middle of the gold finger of the memory stick. Align the gap with the bump in the middle of the slot.

5. Insert the memory module vertically into the memory slot, press slightly from both sides of the memory, and after hearing two clicks, the buckle will automatically snap, and the memory module is installed.

When installing a memory module, you need to distinguish the front and back sides. The installation method is as follows:

1. The appearance of the front and back of the memory module There is a big difference up there, the last thing that matters is the different positions of the card slots, one is to the left and the other is to the right.

2. When installing a memory module, you should also pay attention to whether the memory module is compatible with the computer motherboard model, otherwise the installation will not work properly.

3. Before installing the memory module, open the buckles on both sides outward, as shown in the picture.

4. Then insert the memory stick, confirm the front and back according to the position of the jack, and insert it down to the bottom. Otherwise, the buckle cannot be closed normally. .

5. Finally close the buckle and hear a "click" sound, indicating that the memory module is installed correctly and the front and back sides are correctly distinguished.

Extended information:

1. The memory module is a computer that the CPU can address through the bus and perform read and write operations. part. Memory sticks used to be an extension of main memory in the history of personal computers. With the continuous updating requirements of computer software and hardware technology, memory modules have become a whole unit of read and write memory. What we usually call the size of computer memory (RAM) refers to the total capacity of the memory stick.

2. The memory stick is an essential part of the computer, and the CPU can address the memory through the data bus. Historically, computer motherboards had main memory, and the memory modules were extensions of the main memory. There will be no main memory on the motherboard of future computers, and the CPU will completely rely on the memory stick. All content on external storage must pass through memory to be effective.

3. In order to ensure the accuracy of memory access data, some memory modules have parity bits, such as 3- or 9-chip memory modules. If you have high requirements for the accuracy of computer operation, it is best to choose a memory module with parity check function.

Reference material: Memory stick-Baidu Encyclopedia

Hello:

1, A memory stick should preferably be inserted into the [first slot].

2. Usually the location of the first slot is the slot [close to the CPU].