惠普笔记本bios开启虚拟化设置(惠普笔记本虚拟化怎么开启)

1. How to enable VT. Different motherboards have different opening methods. It is recommended that you Baidu your motherboard model. If VT is enabled, download CPUV to check whether the VT function is enabled. 2. Start the machine Press DEL or other keys to enter the BIOS settings. Method 1: In the security item, find virtualization and press Enter, set to; You can enable VT virtualization in the BIOS system. The operation method is as follows: Restart the computer. After booting, press the delete key to enter the BIOS. After entering the BIOS , find Virtualization Technology and change Disabled to Enabled2 After entering the BIOS, find Virtualization Technology and change Disabled to Enabled3 Select; 1 Press the power button of the computer to turn on the computer 2 Press the F10 button when turning on the computer to enter the computer's bios settings In interface 3, enter the system above, find the virtualization technology option, and click to enter 4. In the pop-up interface, select enabled option 5 and press on the keyboard.
2. 1. Shut down the computer, press the power button again to turn it on. While turning it on, quickly press the F10 button to enter the bios2. After entering the bios interface, select the security option 3 at the back to enter the security interface. Then select the system security option below. 4. Enter key to enter the setting interface; turn on VT virtualization technology through BIOS settings. The specific steps are as follows: 1. Press the esc button when you turn on the computer. You can see the following content on the screen. Click F10 to enter the setting bios. , you can also directly click F10 to enter 2. After entering the bios settings, as shown in the figure below, click the system setting option 3 up and down arrow keys; 1. First, on the HP Shadow Elf 5Plus computer, press the "power on" button on the keyboard 2. Then while the computer is booting, press the "F10" button on the keyboard 3. On the BIOS setting interface, select the "System Settings" option 4. Then on the BIOS setting interface, click "Processor Virtualization Technology"; you can also When booting, directly click F10 to enter the bios settings. Click system settings as shown in the figure. Then you can see the option "Processor Virtualization Technology". Processor virtualization technology is the vt we want to set. Use the arrow keys to select processor virtualization. Tech Security f5 or f6 to change the on or off status to turn it on.
3.1 After entering the BIOS on some HP computers, you need to select the System Configuration menu, then select Device Configuration, find Virtualization Technology, and set it to Enabled2. After entering the BIOS on some Lenovo Thinkpad computers, you need to select the Security menu, and then ; This operation takes a Dell computer as an example. The specific steps are as follows: 1. Enter the computer motherboard and set the BIOS to restart the computer. As soon as the computer is turned on, press the button next to 0 on the small keyboard or the F2 key. Note that if it is a Lenovo notebook, press fn+f2, press fn in the lower left corner of the keyboard if it is an HP computer; 09 then select Advanced Advanced CPU Configuration to find the Intel Virtualization Technology option in the processor settings, set it to Enabled, as shown in the figure 10 Press F10 to save and exit This CPU supports VTx, but this motherboard does not have this option, at least; 1. First turn on the HP computer, press and hold the DEL key when the logo appears, and enter the bios interface. 2. The main information interface of the computer is displayed when entering the interface. Switch to the Advanced tab, find the CPU virtualization setting item, or select CPU virtualization for VTX or VTD3, press Enter to modify its value, and change it.
4. Try booting into the BIOS to set up Virtualization Technology. Enable and disable processor virtualization technology. Change this item to Enable, save and exit; 1. Press and hold F12 to enter the bios when booting, and enter Finally, select the Configuration option, select IntelVirtualTechnology and press Enter. Note that if there is no VT option or cannot be changed, it means that your computer does not support VT technology. 2 Move the cursor to Enabled and press Enter to confirm. 3 At this time, the option will become Enabled. .
5. 1. Press the Del key to enter bios when booting or restarting, click Advanced to enter 2. Then set cpuconfigurationintelVirtualizationTechnology to enable, 3. Press F10 to save the settings to enable VT virtualization technology. Note that you need to enable VT in the BIOS; you OK, the steps to turn on VT virtualization are as follows: Press the power button and then press F10 continuously to enter the BIOS, then select the "System Settings" tab, set "Processor Virtualization Technology" to enabled, save and exit, and then click the English version of the BIOS. The setting content is "SystemConfiguration", "IntelVirtualization.

First enable and install the virtual machine in the BIOS settings, and then install the virtual machine under the system.

1. Start virtualization settings under BIOS:

Intel platform

1. After the computer is turned on, immediately press the 'delete' key on the keyboard to enter the BIOS [EZMode] page

2. Press the F7 key on the keyboard to enter AdvanceMode, as shown in the figure below:

(If you press the 'delete' key on the keyboard after turning on the computer, you will enter AdvanceMode. BIOSAdvanceMode, there is no need to press the F7 key on the keyboard)

3. Click the [Advanced] page and click the [CPUConfiguration] option

4. Click the [Intel (VMX) Virtualization Technology] option and set it to [Enabled]

5. Press the F10 key on the keyboard and click [Ok] to save the option. After the computer restarts, the BIOS settings can be completed

AMD platform

1. After the computer is turned on, immediately press the 'delete' key on the keyboard to enter the BIOS [AdvancedMode] page

2. Click the [Advanced] page and click the [CPUConfiguration] option

3. Click the [SVMMode] option and set it to [Enabled]

4. Press the F10 key on the keyboard and click [Ok] to save the options. After the computer restarts, the BIOS settings will be completed

Second, install the virtual machine under the system.

1. Click Search and enter "Control Panel"

2. Click [Uninstall a program]

3. Click [Turn Windows features on or off]

4. Check [Hyper-V] and click [OK]

5. Wait for the Hyper-V function to be installed and click [ Restart now]

6. After restarting the system, click [Start Menu] and select [Windows System Management Tools]

7. Select [Hyper -V Administrator]

8. Right-click [Virtual Machine], select [New], select [Virtual Machine]

< p>9. Click Next

10. Set the name and location of the virtual machine and click Next

11. Select the generation of this virtual machine Click Next

12. Set the startup memory size and click Next

13. Set up the network connection: Select [DefaultSwitch] and click Next< /p>

14. Set the name, location and size of the virtual disk and click Next

15. Set the bootable image file and click Next

16. Click Finish

17. Right-click the virtual machine and select Online

18. Select the language to be installed and click Next

19. Check Select I accept the licensing terms and click Next

20. Select the installation type

21. Set the disk size and click Apply

22. Click OK

23. Click Next

24. Wait for the installation

25. Restart the virtual machine after the installation is complete

Enable the virtualization function in the computer's BIOS (BasicInput/OutputSystem) settings. The specific steps may vary depending on different computer brands and models, but the following is a general method:
1. Turn off computer, then turn it on and enter the BIOS interface. Usually you need to press the DEL, F1, F2 or F10 key to enter the BIOS interface (the specific keys may vary depending on the computer brand and model, please confirm according to your computer manual).
2. In the BIOS setting interface, switch to the "Advanced Menu" or a similarly named tab, and then look for related settings such as "CPU Configuration" or "Chipset Configuration".
3. Find "Virtualization Technology", this option may be named VT-x, AMD-V or IntelVirtualizationTechnology, etc., select it and set it to "Enable".
4. Confirm the changes and save the BIOS settings. Different computer brands or models may have slightly different ways of performing this operation. Generally, you can use "SaveandExit" or similar options under the corresponding tab to save modifications and exit the BIOS interface.
5. Finally, restart the computer to make the new BIOS settings take effect.
It is worth mentioning that turning on virtualization technology can enable the host system to obtain better performance and stability when running virtual machine software. If your computer runs virtual machines frequently, it is recommended to enable virtualization technology to improve system performance.